BSD-68402 Air-Cooled Two-Stroke Gasoline Engine Oil Additive Package

Product Performance

This product is compounded with low-ash detergents, single-grafted ashless dispersants, etc. It has excellent detergency, lubricity, low ash content and outstanding smoke emission performance. It also can reduce exhaust system blockage and has good antirust and anti-pre-ignition performance. The air-cooled two-stroke gasoline engine oils of FB, FC and FD grades formulated with this product meet the performance indicators of Japanese JASO M345 FB, FC and FD.

Recommended Dosage

FB: 1.5%; FC: 2.0%; FD: 2.5%

Technical Parameter

Product Appearance

Packaging and Acceptance

• This product is packaged in standard iron drums, or in BIC ton drums or other packaging forms according to customer needs.
• Product identification, sample retention, and delivery acceptance shall be carried out in accordance with SH/T0164 standard.

Product Storage, Transportation, and Compounding Agent Blending Operations and Precautions

• The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other petroleum products.
• When adjusting oil, the maximum temperature should not exceed 75 ℃.
• Long term storage temperature should not exceed 50 ℃.
• Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using, pay attention to sealed storage.

Health and Safety

• The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general petroleum products in terms of safety, environmental protection, and use.

• Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away from children.

• Wear protective gloves when using, and the operator does not need to take special safety precautions. Once it splashes into the eyes or skin, rinse thoroughly with plenty of water.

• Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.

• Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling and disposal, and are prohibited from being discharged into water bodies or soil.

• For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).

EP Motor Oil Additive Package

rust resistance Motor Oil Additive Package

Motor ep additives in gear oil

Air-Cooled Two-Stroke Gasoline Engine Oil Additive Package(BSD-68402) Images